Results 1 to 10 of 13
Thread: What plastic for Printer Parts
Threaded View
-
10-28-2015, 09:12 AM #6
- Join Date
- Feb 2015
- Posts
- 371
I am curious what changes you would make. I see there may be room for improvement on the z as well. For example, the v slot wheels on my z don't all spin when the z is moving up and down. I can freely spin the inside wheels. Also, I'd like to firm up the z towers a bit. I see some resonance waves in the side walls which I think is from the towers rocking.
Building the the parts first from ABS or PETG is a good way to prototype. I have used ABS with good results.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion