Results 1 to 6 of 6
Threaded View
-
10-26-2015, 09:47 AM #6
- Join Date
- May 2015
- Posts
- 14
Horendus, regarding tip #4: I can find nothing in the printer settings that allow for an offset to the A axis. Others have suggested that the only way to offset the Z axis is to use a shim on the limit switch. I would appreciate it if there is a way to do this using settings.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help