Results 1 to 10 of 14
Threaded View
-
10-25-2015, 01:27 PM #2
I think those 2 screws are the same as used in CTC printer.
If so, they are 3mm screws, 15mm thread length.
Note: there may be some screws in Bag-B that will fitLast edited by EagleSeven; 10-25-2015 at 01:44 PM.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)