Results 1 to 10 of 26
Thread: Showcase prints?
Threaded View
-
10-23-2015, 12:31 PM #4
- Join Date
- May 2014
- Posts
- 16
The Inland "silver" is pretty much a grey. Hatchbox silver PLA is a bit darker, and more silvery.
I didn't do any post processing Came off the printer like that. It did have support under the plate, as there is a recess in the middle over the switch, so I removed those, but thats it. I did have to glue back one of the small prongs that broke while removing it from the bed. But that is probably a PLA thing, more than a printer thing. More brittle, and parts made vertically will always be weaker due to the layers.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help