Results 11 to 14 of 14
Thread: Different Fan at Mobo !
-
10-21-2015, 01:39 PM #11
-
10-21-2015, 03:28 PM #12
- Join Date
- Oct 2014
- Posts
- 441
Thanks for the tip I searched around and found the right size hex wrench in my flashforge pack that came with my FFCP. Woot! Now to get this all switched around.
-
10-22-2015, 11:54 AM #13
I can see that the larger fan is going to need an Air-Filter attached to it.
Larger fan equals larger amounts of dust and filament-threads pulled in under printer !
I had already attached a grill to it, so I'll attach a removable Filter to the grill.
There is still room for that since the fan is only 15mm thick.
-
10-25-2015, 09:40 AM #14
Another advantage of the quieter Mobo Fan is that I can now hear the Power-supply fan,
turning off and on, to know if and when it is operating,
since there is no way to See if it is.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help