Results 1 to 3 of 3
Thread: Making a Cross hatch or grid
Hybrid View
-
02-18-2014, 08:24 AM #1
We use Slic3r, and usually specify a rectilinear fill pattern at 45 degrees at 30% fill. This gives alternating layers of / and \ infill patterns which intersect on layer boundaries, but do not overlap on the same boundary.
If that helps.
-
02-19-2014, 06:33 AM #2
- Join Date
- Feb 2014
- Posts
- 2
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help