Results 1 to 7 of 7
Thread: Powerspec ULTRA 3d Printer
Threaded View
-
10-19-2015, 04:29 PM #5
- Join Date
- Sep 2015
- Posts
- 9
The problem with the Ultra(Dreamer) is that you don't have the control over important settings that the "old" one does.
No JKN advance settings, no installing new versions of Sailfish as they roll out, no adjusting max speed change(xy jerk), only acceleration.
No being able to use GPX plugin on octoprints interface to change EEPROM settings, etc
They totally took all that control freedom away.
I know this because I was debating between the 3D PRO($699) and the Ultra($999) . I was in the store and saw the Ultra prints. I saw a lot of corner ringing. I asked them to cancel the current print so I could adjust "max speed change". That option is nowhere anywhere to be found, only acceleration. Not on the printer screen, not in the flashprint software, and you cannot use ReplicatorG to change the software settings, because it's incompatible.
I chose the 3D pro, for $699, brought it home, flashed it with the latest Jettyware Sailfish, added octoprint, plugged a webcam into it, and life is good
Last edited by bonzo; 10-19-2015 at 05:18 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help