It cannot be done like that. The whole Gcode is geared to the amount that is extruded at any instant, it has to be in the Gcode as far as I can see anyway.
Fit the same size nozzles to all the machines.
I tried, the nozzles are different by such a small amount that I can visually tell the difference. I get a 5 pack of 0.5mm nozzles from china and some of them overextrude badly. I need to get 0.4mm and drill them out with my 0.5mm drill bit but even then its not exact.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help