Results 1 to 2 of 2
Thread: low nozzle temp
-
10-15-2015, 04:35 PM #1
- Join Date
- Mar 2015
- Location
- st louis
- Posts
- 9
low nozzle temp
my machine is having trouble keeping an extruder at temp
if i set the temp at 240, it runs about 235. and takes a long time to get there before starting the print
if i set it at 180 it does the same, about 175
is this a nozzle,or thermocouple issue
thanks
-
10-16-2015, 05:43 AM #2
- Join Date
- Mar 2015
- Location
- st louis
- Posts
- 9
Thanks for all the help and suggestions.
It was a bad thermo couple, seems the wire was broke just inside the rubber boot at the heater.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help