Results 1 to 10 of 11
Thread: 3D printed waste survey
-
10-14-2015, 08:06 AM #1
- Join Date
- Oct 2015
- Posts
- 1
3D printed waste survey
My name is Spencer McClung and I am a senior at Glenelg Country School in the Project Lead The Way Engineering Design and Development class. In my group is Joe Zhou and Michael Hannah. The goal of the class is for the groups to take a problem, and fully design a solution from conception to marketing. Our problem statement is as follows, "With the meteoric rise of 3D printing in the last 5 years, the amount of wasted filament has become enormous. With up to 40% of all printed material being used for bridges, platforms, and supports that are meant to be discarded, as well as countless misprints and obsolete prototypes, hundreds of tons of reusable filament is ending up in our trash."
To solve this issue, we are planning on creating a device to recycle printed materials back into usable filament. We would really appreciate it if you would take a minute to fill out this survey so we can get some good data on 3D printing use. The survey is a this link https://www.surveymonkey.com/r/9XNGBVF.
Thank you very much,
Spencer McClung, Joe Zhou, Michael Hannah
-
10-14-2015, 08:19 AM #2
Don't Worry About it !
It's Not a Problem !
Now Molded plastic, That's a Real problem !! LOL
-
10-15-2015, 07:09 PM #3
- Join Date
- Sep 2015
- Location
- Cocoa, FL
- Posts
- 10
Survey completed. Good luck!
Chachin..
-
01-19-2016, 09:55 PM #4
- Join Date
- Aug 2015
- Location
- UK
- Posts
- 10
-
01-20-2016, 06:09 AM #5
good survey. Relevant questions, not too many of them and no daft ones :-)
-
01-20-2016, 07:12 AM #6
-
01-20-2016, 09:45 AM #7
-
01-20-2016, 10:45 AM #8
-
01-20-2016, 02:48 PM #9
My mistake. My one browser doesn't show any smileys. Font is all messed up too...
-
01-20-2016, 03:09 PM #10
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help