Quote Originally Posted by JohnnyV View Post
What material are you using and what is your bed temperature?

Here are the settings I use for S3D and a flashforge knock off (Powerspec 3D Pro).
Layers: 2
Offset from Part: 2.00
Separation Distance: 0.20
Raft Infill: 70%

I get pretty good results with Inland ABS. Rafts can be difficult to removed. I use a razor blade to help shave it off. I'm also considering bumping the separation distance up a bit to 0.25 to make it easier.

You might also consider using a glue stick or ABS slurry instead of a raft. Some people prefer that.
Ive tried everything with my 4 printers to get parts to stick. PEI (sanded) is the best. Slurry, glue, does nothing for the types of parts some of my customers require. The only option i had for my last customer was creating a custom brim. just create .4mm parts that i would combine in s3d and make a strong part. The difference with that way, vs the brim feature in software is that the brim in software is not part of the part, its a layer apart.. and thus, doesnt work.

90c bed temp. Hatchbox abs, which is always my fav.