Results 1 to 3 of 3
Thread: Unimpressed thus far.
-
10-09-2015, 08:39 AM #1
- Join Date
- Oct 2015
- Posts
- 8
Unimpressed thus far.
Got mine yesterday. after opening it to find a cracked enclosure... i cant get it to print well at all..
the head sits just a little too far from the build plate and therefore fails at every print.
If i push very lightly on the head manifold it will successfully print.
not impressed thus far
-
10-09-2015, 07:49 PM #2
Sounds like you just need to adjust the z gap.
-
10-09-2015, 07:53 PM #3
- Join Date
- Oct 2015
- Posts
- 8
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help