Results 1 to 10 of 125
Thread: Wanhao Duplicator I3 3D Printer
Threaded View
-
10-07-2015, 07:20 PM #11
- Join Date
- Sep 2015
- Posts
- 24
I checked the jumper, and it was indeed closed. I unplugged it and went on to tweak the wires a little. I added a small aluminum piece to the heat bed and then clamped the wires in a P-clamp. The movement now stops at the clamp instead of the solders. I also added a zip-tie to the wires where they exit the cable chain on the extruder assembly. That stopped the wires from moving about the connectors on the extruder and such.
Printer12.jpgPrinter13.jpg
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help