Results 1 to 5 of 5
Threaded View
-
10-02-2015, 10:23 PM #4
- Join Date
- Sep 2015
- Posts
- 4
gcode sending fix
Any format will do...just wipe it clean. It will be two folders called user and sys. Sys will have 5 files. Both folders have to be on the tf card. That was my problem. When I cut and pasted folders, only the sys (with 5 files) went to the tf card. That was enough to stop the gcode from transferring from computer to printer. To fix the problem, I created a user folder and slide that in the tf card as well as the sys. After 4 days of working on this and Raymond's help at Flashforge, we were able to solve a challenging problem. Raymond told me 99% of the time, the problem is the data on the tf card....and he was right!
Last edited by tutor4uLLC; 10-02-2015 at 10:25 PM. Reason: mistake
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion