Results 1 to 3 of 3
-
09-13-2015, 09:02 PM #1
- Join Date
- Mar 2014
- Posts
- 30
M3D printer, $350 plug and play printer
I have done some initial prints on my M3d, using ABS. Here is my review, and some comparison to the Afinia I have. http://nvrr49.blogspot.com/2015/09/m...st-prints.html
These are 1/87th scale barrels, 7/16" diameter. The red one was printed on the M3D.
M3d%u00252B0075.JPG
-
09-27-2015, 11:22 AM #2
- Join Date
- Mar 2014
- Posts
- 30
I printed these shelves on the M3D. The pianos, benches and stools were printed at Shapeways. More details can be seen at: http://nvrr49.blogspot.com/2015/09/p...rinted-at.html
Piano%u00252B2%u00252B012.JPG
-
10-26-2015, 06:21 PM #3
- Join Date
- Mar 2014
- Posts
- 30
Some 1/87th scale concrete blocks I printed on the M3D. More pictures and design details can be seen at http://nvrr49.blogspot.com/2015/10/m...cks-in-ho.html
Design not printing solid
09-17-2024, 06:12 AM in 3D Modeling, Design, Scanners