Results 1 to 10 of 31
Thread: Printing with Nylon
Threaded View
-
02-15-2014, 05:33 PM #2
Idabkey,
When we print in Nylon, we print at about 220C, hotbed at 60C, and we print on a special surface: sandpaper glued to the glass build plate.
We don't do it much, just enough to prove the functionality.
Good luck!
-Davo
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)