Results 1 to 10 of 19
Thread: FIlament jam/grind at height.
Threaded View
-
09-22-2015, 04:23 AM #8
- Join Date
- Jun 2014
- Posts
- 349
I had jamming too from too much retraction. Caused a flattening of the filament which got stuck in the pathway to the nozzle. Solution was to use only one of the two springs that holds the idler to the filament, and, use less retraction.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion