Results 1 to 4 of 4
Threaded View
-
09-21-2015, 03:05 AM #4
- Join Date
- Sep 2015
- Posts
- 12
I am pretty sure its a warped bed - I have the glass now too so will be trying with corner blocks
I also came to the conclusion that it is worse with the windows in my office open - the small breezes that pass through the printer seem to make the abs lift and curl - so when printing in ABS i cover one side of the vents and have printed a louvered vented panel for the other side to cut down and direct the air flowing into the machine away from the surface of the print.
I swap back when doing PLA and cut down on the temperature but I never have much luck... it may be getting old though as its been in the printer since i got it about 2 months ago
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help