Results 1 to 9 of 9
Threaded View
-
09-20-2015, 10:06 AM #2
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
Ok so its not seperating along layer lines right? Each perimeter is seperating from the on next to it so its seperating vertically? If thats the case then your underextruding. Each perimeter isnt bonded to the one next to it because they are not touching or touching enough. Check filament dia and ext multiplier.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help