Results 1 to 10 of 23
Threaded View
-
09-16-2015, 07:10 AM #8
Hmm, okay that's not going to work.
plan b :-)
Well I've managed to level it and align it with the build plate.
My cunning plan was to have it generate 100% support from the build plate.
But it doesn't believe a floating print needs support - so nothing happened :-)
Back to the drawing board.
Anyone know anything about s3d support settings ?
Logically - I thought - if I set 100% support from the build plate only. It should have filled the space under the floating shell with solid support.
But it doesn't generate anything.
Plan b MK II would be to remove the thing from a rectangle in openscad and print a reverse image that could be used as a mould with clay/ playdoh etc.
But the support thing seemed logical and simple. Just didn't work - no idea why.Last edited by curious aardvark; 09-16-2015 at 07:34 AM.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)