PrintinZ Zebra Flexi Build Plate

[Ghosty]

Ghosty, I'm interested in knowing how you're holding the PRINTinZ Plate on your FlashForge. I tried using the recommended medium binder clips but they're too tall and the nozzle runs into them. Maybe a few pictures of your set up would help us newbs.

New FlashForge Creator Pro Owner - with blue print pads from FlashForge

Thanks

hi,

i used a combination of corner clips, then modified and made my own, as with the weight of it, all you need is stabilty in the corners. it actually stays put quite well.

im currently having issues uploading to anywhere except facebook atm. otherwise id send pics.

http://www.thingiverse.com/thing:715545

these are a good starting point, one thing to remember is the flexi-plate is slightly bigger than the stock plate so as these can be adjusted to allow a bigger plate, they fit and hold great

one other thing, i have completly removed the alu plate so mine site directly on the heat plate, however as you dont need heat for pla