Results 1 to 8 of 8
Thread: The right way to change nozzles
Hybrid View
-
09-12-2015, 10:31 AM #1
Well... It is hard to say what you should change. But everybody eventually gets a plugged nozzle. However, you seem to be talking about a common occurrence. You should try to not have the nozzles hot if they are not being used. That is the biggest thing you can do to keep the clogs from happening.
-
09-13-2015, 09:29 PM #2
- Join Date
- Jun 2015
- Posts
- 10
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion