Results 1 to 4 of 4
-
09-10-2015, 06:43 AM #1
- Join Date
- Jul 2015
- Posts
- 26
FlashForge Build Bed screw size in four corners #4 or M3?
Guys, do you guys know the exact size of the four screws holding the build bed down in the four corners.
I measured what I thought a .112 (#4) 4-40 or 4-48?? but that's very close to an M3 and without a thread guage I can't
tell for sure.
Thanks for your help
-
09-10-2015, 06:45 AM #2
all the screws/bolts I've used on mine have been m3's.
And given that when I added the plastic adjusters it was an m3 nut I slotted into the finger wheel - I'm pretty certain that the tension bolts are m3.
http://www.thingiverse.com/thing:243998
But that might not be what you mean :-)
-
09-10-2015, 08:32 AM #3
- Join Date
- Jul 2015
- Posts
- 26
-
09-10-2015, 08:40 AM #4
- Join Date
- Aug 2015
- Posts
- 31
yeah m3's it is..
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help