3rd Party .4mm Nozzle Recommendations

[abesau]

Anyone bought any third party replacement nozzles for their FFCP?
Who do you recommend?

Thanks

[ffvader]

I bought the avn swiss all metal hot ends.. very happy with it.
they also have nozzles at their site
http://www.micro-swiss.com/#!product...e-cece31e3ba6f

[curious aardvark]

well I've bought nozzles from 2 companies - neither were wide enough for the teflon tubes.
My mate got me some last year that were the right size, but alas only 1 0.4mm and a half dozen 0.5's
And as you have to change nozzles in matched pairs, it wasn't a suseful as he hoped :-)
I supposedly bought the same thing from the same company - hole too narrow.

But getting nozzles with a hole wide enough for the teflon tubes is a nightmare.
They don't list the shaft diameter on ebay, or on any website I've looked at.
I satill don't have anywhere to buy them as I'd like to change the creator x from a 0.4 and a 0.5 back to 2 0.4's.

[rforeman]

well I've bought nozzles from 2 companies - neither were wide enough for the teflon tubes.
My mate got me some last year that were the right size, but alas only 1 0.4mm and a half dozen 0.5's
And as you have to change nozzles in matched pairs, it wasn't a suseful as he hoped :-)
I supposedly bought the same thing from the same company - hole too narrow.

But getting nozzles with a hole wide enough for the teflon tubes is a nightmare.
They don't list the shaft diameter on ebay, or on any website I've looked at.
I satill don't have anywhere to buy them as I'd like to change the creator x from a 0.4 and a 0.5 back to 2 0.4's.

I got some from this company. They also have the tube precut.

http://www.p3-d.com/low-friction-extruder-nozzles.html

[Preloi]

I bought the avn swiss all metal hot ends.. very happy with it.
they also have nozzles at their site
http://www.micro-swiss.com/#!product...e-cece31e3ba6f

Hi!

Does this Hotend fit for a FF Creator Pro??

[abesau]

I've been staying away from attempting it b/c I have not found reliable information that confirms a successful all metal hot end replacement on a FlashForge. I will not do it until I see video evidence that proves it. Or at least I didn't find evidence at the time. If you're brave enough to do it, maybe you could document it and post it here so we can all learn.

Thanks
(above post answer refers to the all metal hot ends, not the nozzles) Preloi, were you referring to the nozzle or, all metal hot ends?
Finding nozzles is a whole other issue, from what I'v read on this forum.

Hi!

Does this Hotend fit for a FF Creator Pro??

[Peet@FFUSA]

You can purchase them from our webstore for best fitment.

http://www.flashforge-usa.com/shop/p...es/nozzle.html