Results 1 to 5 of 5
-
08-31-2015, 04:13 AM #1
- Join Date
- Aug 2015
- Posts
- 2
Recommend me a hotend for the Turnigy Fabrikator
Hi.
My hotend burnt before I could print anything, can anyone recommend a hotend which doesn't require modding the printer or losing Z?
URL and pics would be awesome.
Thanks
Oops.. thought I posted this in "3D Printer Parts, Filament & Materials", mod can you move it pls?
Last edited by raybies; 08-31-2015 at 04:18 AM. Reason: Wrong forum
-
08-31-2015, 08:07 AM #2
I was curious to try the autolift hot ends, because in dual it seemed cunning.
The Printrbot metal hot end is real great (I have it) and smallish but I think the smallest is the E3Dv6 (or at least that's what they wrote).
-
09-01-2015, 06:37 PM #3
- Join Date
- Aug 2015
- Posts
- 2
Is the total height of the E3Dv6 62mm? Do you know if it's a straight swap, bcos on rcgroups I was recommended the E3D lite, but then I had to change settings in the fw, drill holes and reduce my z axis, it's only 100mm currently .
Thanks.
-
09-02-2015, 01:34 AM #4
I asked the E3D support team the dimension and they sent me a schematic with all the dimensions. Can't find it right now though.
You can get that from Printrbot support webpage as well for the new metal hot end.
-
09-02-2015, 02:01 AM #5
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help