Results 1 to 4 of 4
Threaded View
-
09-01-2015, 07:52 PM #4
- Join Date
- Aug 2015
- Posts
- 9
I have resolved the issue and am posting the fix to help anyone else who is dealing with this problem.
The problem was my X axis steppe motor cable had developed a stress fracture somewhere along it due to the fact this cable is always flexing with the printer heads X axis movement.
I noticed this was the issue when I was in JOG mode and I brushed past the steppe motor cable by accident which caused the motor to slightly jerk!
I made up a new cable using thicker wire and the existing connectors and found the printer works perfectly again
I hope this information can be used to help anyone else with this issue as it would also apply to the many other 3D printers of this design.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion