Results 1 to 7 of 7
Threaded View
-
08-31-2015, 08:57 AM #4
- Join Date
- Feb 2014
- Posts
- 36
I always wondered why you need to turn the laser on and off at all. Why not have a small disk with different sized openings (and a part of it w/out any opening) in front of the laser. Rotate 30 degrees to select a small opening for the laser, 60 for a large opening (infill) and 90 degrees to block it completely. Or something like that.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion