Results 1 to 4 of 4
Thread: original sd card
-
08-26-2015, 09:59 AM #1
- Join Date
- Aug 2015
- Posts
- 12
original sd card
I dont suppose anyone on here has the original sd that came with their ff creator pro ? , really i am after the bed levelling script that is on the card i have wiped mine and would quite like to have this function back instead of the levelling in the firmware
-
08-26-2015, 11:56 AM #2
That script is built into the firmware. With Sailfish it isn't used anymore, you just run the leveling program then manually move the print head to where you want to measure.
-
08-30-2015, 04:13 AM #3
You have one week:
https://www.wetransfer.com/downloads...0075500/e2a6fb
-
08-30-2015, 05:09 AM #4
- Join Date
- Aug 2015
- Posts
- 12
thanks mate
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion