Results 1 to 8 of 8
Thread: FFCP X-Axis Warped/Bent
Threaded View
-
08-27-2015, 05:48 AM #3
- Join Date
- Jun 2015
- Location
- Sydney Australia
- Posts
- 36
Sebastian, thank you for your suggestions, I would agree with the sagging if the reading was positive (+0.20mm), a negative value (-0.20mm) suggest the rods are convex. I'm interested in your suggestion "installing larger (and heavier - caution!) rods" especially the "caution!", as I'm planning to replace the extruder carriage with alum.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help