Results 1 to 10 of 10
Thread: 10" Regret?
Threaded View
-
08-24-2015, 11:32 PM #4
- Join Date
- Feb 2015
- Posts
- 211
I often wonder if many of the banding issues I have aren't related to this. Not sure about the 8" but the 12" frame has a bunch of flex to it and before I replaced my wooden Y axis bed with aluminum it would warp bad enough that it would hit the frame on the back that holds the Y motor.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion