Results 1 to 8 of 8
Thread: Computer shell
-
08-19-2015, 03:41 AM #1
- Join Date
- Jul 2015
- Posts
- 29
Computer shell
I always want to design a computer shell, like a castle or a UFO, then I can install all hardware of a computer inside.A castle finished, but down soon.Is any one here have the same idea to make your PC much more cooler?
-
09-11-2015, 09:38 AM #2
- Join Date
- Sep 2015
- Posts
- 11
Haven't thought about it until I read your post. It is a good idea! I thought of having the motherboard on the door of the castle for easy upgrades
-
09-12-2015, 10:40 AM #3
Better plan this very carefully. Heat can cause major problems. PLA's glass temp is 60°; go over this and the whole thing can melt. Same for most plastics (different glass temps though).
-
09-13-2015, 03:59 PM #4
was thinking of making a printed basic case for mini itx boards that you could hook a psu onto and maybe hang on the back of a tv or monitor.
But making a computer look cooler - nah, got too many to bother with that kind of thing :-)
-
09-13-2015, 08:06 PM #5
Wow, never thought of creating one! Great idea! I think maybe you can add some fans inside your castle model so that your PC will be much cooler? That's the idea I can think of right now.
-
09-14-2015, 11:15 PM #6
- Join Date
- Sep 2015
- Location
- Australia
- Posts
- 3
Great idea but you need to check where you will place the board it needs to have fans and exhaust exits also check in detail so that it will not have short circuit.
-
09-16-2015, 06:43 AM #7
I did always want one of the modded cases that doubled as a coffee maker. Not sure you could print one though :-)
-
09-16-2015, 06:52 AM #8
- Join Date
- Sep 2015
- Posts
- 11
Maybe one that has a coffee maker that you insert. I've been having a lot of ideas like a case that has a filament holder or a lot of storage
Printer will print perfect...
Today, 09:40 AM in Tips, Tricks and Tech Help