Results 1 to 3 of 3
Thread: setting up a glass bed?
-
08-18-2015, 09:14 AM #1
- Join Date
- Dec 2014
- Posts
- 42
setting up a glass bed?
I picked up a glass bed for my PowerSpec 3D Pro. The bed is 1/4" thick. I also have the Z shim printed out. Do I need to set up anything in the Printer's settings so the heads don't crash into the plate? I didn't want to power it up and send the head into the glass.
-
08-18-2015, 01:01 PM #2
- Join Date
- Aug 2015
- Posts
- 31
if you put the shim in you should be okay, but just to be safe, i would crank my leveling knobs all the way down just to be safe and then you can open them up when you are leveling the bed
that way you are sure you don't hit.
-
08-18-2015, 01:11 PM #3
- Join Date
- Dec 2014
- Posts
- 42
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help