Results 1 to 3 of 3
Threaded View
-
08-17-2015, 04:50 PM #2
- Join Date
- Jan 2014
- Posts
- 462
Yes, it was. The fan on the volcano's heat sink needs to be on all the time, or heat from the hot end will creep up, cause the filament in the cold end to expand and create a blockage.
After the end of a print, you need to leave your printer powered on for a while so everything has a chance to cool down properly.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help