Results 1 to 10 of 27
Thread: Waves in corners?
Threaded View
-
08-17-2015, 07:14 AM #17
Corner ringing gets more pronounced when you are printing at higher speeds. So if a user is printing at a ridiculously slow 30-40mm/s then they will probably never see any ringing. Bump that up to a more reasonable 80-100mm/s then acceleration settings become much more important to reduce these effects. Removing the left stepper and extruder helps also to reduce print head weight.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion