Results 1 to 3 of 3
Thread: Makerbot Z18 First Layer Issue
Threaded View
-
08-14-2015, 08:25 AM #2
- Join Date
- Mar 2015
- Location
- Slovenia, Europe
- Posts
- 76
Hi there
make sure to use latest Desktop as well.
Adjust print speed for First Layer Raft to 20 or so.
Make sure there is 0.29 distance in RaftModelSpacing.
Regards
Roberto
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion