Results 1 to 2 of 2
Thread: Replicator 2 Poor Print Quality
-
08-11-2015, 09:51 AM #1
- Join Date
- Aug 2015
- Posts
- 4
Replicator 2 Poor Print Quality
Hello Everyone,
I've been having quality issues with the prints made on my Replicator 2 (5th Generation).
I've tried all 3 preset Resolutions and decreasing the Z-axis, but still subpar quality. Layers are not binding well and flat surfaces have many gaps.
I've attached some pictures. Thoughts on fixing this?
Thanks for the help,
Jesse
IMG_0067.jpgIMG_0068.jpg
-
08-12-2015, 02:10 AM #2
- Join Date
- Mar 2015
- Location
- Slovenia, Europe
- Posts
- 76
Hi there
you have problem with underextrusion - look like from pics.
Before you change Smart Extruder, you try install latest Firmware and Desktop software.
It works in some cases.
But if still the same result then I'm afraid you will have to consider change Smart Extruder.
Regards,
Roberto
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion