Results 1 to 10 of 321
Thread: Flashforge 3D Creator forum.
Threaded View
-
02-11-2014, 05:52 PM #6
- Join Date
- Feb 2014
- Posts
- 2
Thanks Geoff, that was a lot of very useful information, especially the part about print speeds. I hadn't considered the effects of running at accelerated speeds.
Please keep the tips coming.
And thanks MrWayne, I took your advice about the wing nuts and hunted some down today along with some washers and WOW, what a difference it makes leveling the bed! $3.28 well spent.
If figured out now that I'm going to need a new build plate for sure, there is no way I can get it so there's an even distance between the head and the plate across the entire platform, whether its hot or cold...
I'm concerned about the glass bed with clips option, I've read you need to always remember they're there or you'll run the nozzle into them during certain operations and my memory just isn't that good.
I'm thinking about trying the borosilicate on CPU heat sink sheet, without clips. Yes/No ?
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help