Results 1 to 3 of 3
-
07-15-2015, 04:09 PM #1
Next Live Broadcast: Sunday, July 26, 2015 @ 8pm EDT (2000hrs)
Next Live Broadcast: Sunday, July 26, 2015 @ 8pm EDT (2000hrs)
Yes, another live broadcast. I haven't been told the thrust of the content, so tune in and find out!
On UStream: http://www.ustream.tv/channel/hyrel
Our YouTube Channel: https://www.youtube.com/channel/UCT-...4xoTvbJCjyDFXALast edited by Davo; 07-24-2015 at 03:44 PM.
-
07-20-2015, 01:07 PM #2
Next Live Broadcast: Sunday, July 19, 2015 @ 8pm EDT (2000hrs)
Preview (postview?) of the latest software release, presently at 2.405 and counting (gotta love code control and auto versioning). Karl will probably demonstrate boring stuff like help menus, links to pdfs and videos, combining and subtracting stls and previewing the gcode, color coded by print head, "click to go to layer" in gcode, right-click to change fan speed or print temp at a certain layer, saving the whole job (multiple stls, as scaled/rotated/positioned, with recipes used for each stl, along with the generated gcode), improved temperature/power graphs, auto recipe refresh... *yawn*
Feel free to lurk, or log in and ask Karl and Daniel a question.
On UStream: http://www.ustream.tv/channel/hyrel
Recording: http://www.ustream.tv/recorded/68121346Last edited by Davo; 07-24-2015 at 03:41 PM.
-
07-24-2015, 03:41 PM #3
Next Live Broadcast: Sunday, July 26, 2015 @ 8pm EDT (2000hrs)
Yes, another live broadcast. I haven't been told the thrust of the content, so tune in and find out!
On UStream: http://www.ustream.tv/channel/hyrel
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion