Results 1 to 6 of 6
Thread: need advice on new filament
Threaded View
-
07-16-2015, 07:16 AM #3
- Join Date
- Jul 2015
- Posts
- 3
I am using it to print battery housings/cases.
I used an Extrusion Bot (first gen)
The diameter is actually about 1.5 mm
I'm thinking about using a larger nozzle today and see if that helps.
I have been printing at 60mm/s. Do you think slowing it down even more would help?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion