Results 1 to 10 of 13
Threaded View
-
07-12-2015, 04:52 PM #7
- Join Date
- Apr 2015
- Location
- Chicago
- Posts
- 42
that is whats happening halfway though the print so i just stop it early and toss it. otherwise the nozzle keeps hitting it every time it passes over it.
Not sure what else to check. bed is level, tried 2 rolls of pla, tried higher temps from 208 to 211 on the pla and bed at 50 and 55*C. not sure what else, but i'm ready to pull my hair out
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion