Results 1 to 10 of 13
Threaded View
-
07-10-2015, 12:01 PM #4
- Join Date
- Jul 2015
- Posts
- 5
95 degrees for ABS
Hey Sebastian, thanks for the tip. I did drop the temp to 95 and the part just popped of are it was done. Very nice!
Also, I used the suggestion to grab the x axis bars and give them a tug to straighten them out. That appears to have worked. my latest print was out by .015 across 4.5 inches, corner to corner. So instead of trying to get it perfect, I flipped the 2nd half of the box around to see what the results will be. But one of the new halves was able to mate with one of the old halves, so my prototype will work!
I may get brave and give it one more pop, but i have work to do so It'll have to wait until Monday.
Cheers!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion