Results 1 to 10 of 20
Thread: Building a Prusa i3
Threaded View
-
07-10-2015, 02:20 AM #2
- Join Date
- Jan 2015
- Posts
- 36
The Y axis made from threaded bar and 3d printed blocks is probably the weakest point on the prusa i3 I've never had a problem with the alloy frame moving .. The side supports are probably overkill.
I came across what I think I'd a better design it's called the p3steel you might want to look at that it fixes the problems I just mentioned.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion