Results 1 to 10 of 23
Thread: Printrbot Metal Plus : prints
Threaded View
-
07-09-2015, 01:42 PM #6
S3D adds the code on its own if you put it in the tool change script.
For my machine it takes about 3 mins to bring the hot end to temp. So if it is only a couple times per print ... No sweat. If you do it at every layer... Better be patient.
Oh and i only do this with pla and pet... Never tried ABS so far.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help