Results 1 to 8 of 8
Thread: Best way to Smooth PLA?
Threaded View
-
02-06-2014, 04:49 PM #3
- Join Date
- Jan 2014
- Posts
- 462
There's a good post on smoothing PLA using THF below. It's evidently no more dangerous than acetone (used for smoothing ABS), but it is still dangerous (might even cause an explosion if you're really unlucky).
http://www.protoparadigm.com/blog/20...ydrofuran-thf/
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion