Results 1 to 3 of 3
Thread: Wrong compensation g29
-
07-05-2015, 10:48 AM #1
- Join Date
- Aug 2014
- Posts
- 2
Wrong compensation g29
Hello, my name is Albert and I have a problem with the automatic leveling, for leveling using a proximity sensor, the problem is that when you palpation of 9 points 3x3, to start printing offset error backwards, say where you have that goes up and down where you have to climb down as I can fix you, the firmware is marlin v1
IMG_3890.jpgIMG_3891.jpg
this is my printer made by me
-
07-05-2015, 11:00 AM #2
- Join Date
- Aug 2014
- Posts
- 2
Sorry for my english
-
07-05-2015, 02:15 PM #3
Can you post the link where you downloaded the firmware? Probably, the easiest fork to help you get your printer going is here:
https://github.com/beckdac/Marlin
If you move your Configuration.h file settings to this release, it won't be too hard to get you going.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help