Results 1 to 10 of 23
Threaded View
-
07-03-2015, 09:57 AM #10
Some photos of the process...the setup:
IMG_2224.jpgIMG_2229.jpg
After the preheat to 100C:
IMG_2228.jpg
And an hour and a half later, after soaking at 110C:
IMG_2243.jpg
Visible warping of the bed mount:
IMG_2231.jpg
I have another test running with three of the bed screws removed.
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help