Results 1 to 3 of 3
Thread: MaherSoft's Indie 3D Printer
-
06-29-2015, 01:26 PM #1
MaherSoft's Indie 3D Printer
Mohammed Khorakiwala, the CEO and Founder of MaherSoft, says his company has spent the past two years working in “stealth mode” to build an industrial-grade 3D printer, the Indie. Khorakiwala says the Indie combines design, aesthetics, usability, repeatability, and value. One major consideration in the machine's design was a requirement to build a dual nozzle printer. This dual nozzle design was critical for its ability to print simultaneous support structures, and the Indie uses HIPS as support material and ABS as the main build material. You can read the whole story here: http://3dprint.com/76759/mahersoft-indie-3d-printer/
Below is a look at the Indie:
-
06-30-2015, 12:39 AM #2
- Join Date
- Jun 2015
- Posts
- 1
hello,
I am the CEO-founder at Maher Soft. my email address is mhk@mahersoft.com. The big advantage of our 3D Printer is that it does not use proprietary filament. We procure ABS from octave and we use HIPS from gizmo. they have excellent quality.
regards
Mohammed
-
07-01-2015, 06:38 AM #3
Hello Mahersoft Team,
We are located in Mumbai only.
If you need any accessories for 3D Printer, kindly contact us on 3dglobalhub@gmail.com
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help