Results 1 to 1 of 1
-
06-13-2015, 06:07 PM #1
- Join Date
- Jun 2015
- Posts
- 7
Which orientation produces the best looking filleted edge
Hello, I have a rectangular block with one of the four long edges filleted. In which orientation during printing would produce the best looking filleted edge? I have tried two orientations: standing straight and flat on the build plate. The quality of both prints are nearly the same. I have to remove support on screw holes in the case of standing straight orientation.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion