Results 1 to 10 of 66
Thread: Mount and Reservoir Discussion
Threaded View
-
06-12-2015, 12:51 PM #10
- Join Date
- May 2015
- Location
- Near Seattle
- Posts
- 23
Ok, Cool.
You might be able to play with the Mesh Deform Cage in Blender to rapidly zero in on the required deformation matrix. i.e. model a concentric onion cube (with smaller cubes inside) like shape, print, measure, and play with the deformation in Blender .. seems like it wouldn't take too many prints and a caliper to get the deformation seed matrix close to correct. Probably help the larger you can print the test object.
Cool.. so the sample prints are about 10 micron Z or so.
Your results with the peristaltic pump sound promising. =)
Has anyone done any tests with vibrating the build area to overcome surface tension/meniscus?
I got the injector in the mail today, but I'm waiting for the pump still, so it will be a bit (and a trip to the hardware store for other bits) before I can play with it further.Last edited by Toasterboy; 06-12-2015 at 04:35 PM. Reason: typo
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help