Results 1 to 10 of 10
Thread: Printing off-center
Threaded View
-
06-12-2015, 09:06 AM #7
Lots of slicers out there. Including the one that came with the FlashForge. Try a different slicer and see if you have the same problems.
Lots of slicers out there. Including the one that came with the FlashForge. Try a different slicer and see if you have the same problems.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)